If the bathroom pocket door on an Alliance Paradigm 310RL comes loose from its upper track or simply needs adjustment one way or the other, you can access the top roller/hanger hardware without disassembling the wall.
How to Access and Adjust the Door
Remove the upper trim.
From inside the bathroom, carefully remove the trim above the pocket door. This exposes the upper track and roller/hanger hardware.

- Support the door.
Slightly lift the door with your hand or foot to take its weight off the hanger you’re working on. - Inspect and adjust the hanger.
The threaded hanger can be screwed in or out to adjust the door height and alignment. If it has come completely unthreaded, lift the door into position and thread it back into the carrier. - Check the door operation.
Slide the door open and closed and adjust as needed until it hangs level, clears the floor, and moves smoothly. - Reinstall the trim.
Once everything is aligned and operating correctly, reinstall the upper trim.
Tip
If one side of the door suddenly drops, check the threaded hanger before assuming something has broken. The hanger can work itself loose and may simply need to be threaded back into the carrier and readjusted.




